Skip to content

20GP or 40HQ: which container is right for your shipment?

Shipping & planning3 min read
20GP or 40HQ: which container is right for your shipment?

Choosing the right container changes what you pay for a shipment, and sometimes whether your goods fit at all. The two boxes asked for most often are the 20-foot standard container (20GP, “general purpose”) and the 40-foot high cube (40HQ), which is one foot taller than a normal 40-foot box. Here is what each one really holds, and how to pick.

20GP and 40HQ side by side
20GP 40HQ
Inside length 5.90 m 12.03 m
Inside width 2.35 m 2.35 m
Inside height 2.39 m 2.69 m
Door opening (width × height) 2.34 × 2.28 m 2.34 × 2.58 m
Volume 33 m³ 76 m³
What fits in practice 25–28 m³ 65–70 m³
Maximum cargo weight (about) 28 t 26.5 t
Euro pallets on the floor 11 24

Typical figures. Every shipping line and every container differ a little: the plate on the door gives the exact maximum weight of that box.

Four rules of thumb

  • Under about 15 m³: groupage (LCL), where your goods share a container with others, is usually cheaper than a full container.
  • From about 15 to 28 m³, or heavy goods: a 20GP.
  • Above about 28 m³ with light or bulky goods (furniture, textiles, plastics, cartons): a 40HQ. It usually costs far less than two 20-foot containers.
  • Heavy goods in a large volume: two 20GP can be better than one 40HQ, because each 20-foot box carries almost as much weight as a 40-foot one.

Weight decides before volume

Dense goods such as marble, tiles, steel, cement, flour or olive oil in drums reach the weight limit long before a 20GP is full. A 40HQ does not carry more weight, so you would pay for empty space. Mind the road too: in Tunisia, as in most countries, the truck, the chassis and the container together must stay under the road weight limit, which can be lower than what the container itself may carry. We check this for the country of loading and of delivery before the container is booked.

Your shipment is about 35 m³: which container?

Too much for a 20GP, which in practice takes 25 to 28 m³. So a 40HQ, unless the goods weigh more than about 26 tonnes: then two 20GP. With 35 m³ in a 40HQ, about half the space stays free. Ask yourself whether more goods can travel in the same container, from the same supplier or another one nearby: the price of the container stays the same.

When groupage is the better deal

Below about 15 m³, groupage usually wins: you pay for the cubic metres you use, not for the whole box. The trade-off is a little more time, because the container is filled and emptied in a groupage warehouse. We can quote both, groupage and a full container, so you can compare.

Before you book

  • Measure the goods with their packing and pallets, not the bare products. Our free freight tools work out the volume for you.
  • Say whether the goods can be stacked: if not, the volume you can use drops sharply.
  • Tall pallets, machines or rolls often need the extra 30 cm of a high cube.
  • Spread heavy goods evenly over the floor and ask for photos at loading: they help if there is a dispute later.

Not sure which container you need? Send us the size, weight and number of packages and we will tell you which container, or which groupage, fits.

Planning a shipment? Request a quote with every fee included upfront, or talk to our team in Tunisia: +216 70 295 255, info@kyranislogistics.com.

Get a price for this shipment

Tell us what you ship and from where to where: it takes a minute.

    We reply within one working day, with every fee included.

    Share it

    Comments

    Ask a question or share your experience.

    No comments yet. Be the first to ask a question.

    Leave a comment

    Your email address will not be published. Required fields are marked *

    Comments appear once we have read them.